RTD Temperature Sensor Transmitter
100 Ohm Platinum PRT Probe IP Alert, how to
resistance temperature detectors thermometer
Products » Environmental Monitoring » Small Enterprise Environment Monitoring System » Medium Enterprise Environment Monitoring System & Large Enterprise Environment Monitoring System
Server Environment Monitoring System RTD Sensors
RTD Temperature Sensors & Transmitters compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
RTD Transmitters
100 Ohm Platinum RTD Transmitter
ENVIROMUX-RTDT-140
ENVIROMUX-RTDT-240
ENVIROMUX-RTDT-240
- Use to connect RTD temperature sensors to the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
- Available temperature ranges:
- ENVIROMUX-RTDT-140: -20 to 140°F (-28 to 60°C).
- ENVIROMUX-RTDT-240: 30 to 240°F (-1 to 115°C).
- Accurate to within ±0.8°F (±0.45°C).
- Configuration: 2-wire connection
- Sensor Element: 100Ω platinum
- Signal Output: 4-20 mA, loop-powered
- Requires the ENVIROMUX-S420MA-24V and an RTD sensor probe to operate with the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
- Single gang weather resistant enclosure.
- Dimensions WxDxH: 2.81x4.50x2.13 in (71x114x54 mm)
- Regulatory approvals: CE
High-Accuracy Platinum RTD Transmitter, -328°F to 1562°F
ENVIROMUX-RTDT-1562
- Use to connect 100Ω platinum RTD temperature sensors to the ENVIROMUX-2D/5D/16D.
- Temperature range: -328 to 1562°F (-200 to 850°C)
- Accurate to within ±0.2°F (±0.1°C)
- Configuration: 2, 3, or 4-wire connection
- Signal Output: RS485
- Interfaces with the ENVIROMUX-2D/5D/16D via the RJ45 sensor port
- Din rail mount housing.
- Dimensions WxDxH: 5.08x4.09x0.89 in (129x104x23 mm)
- User-configurable to also support 120Ω nickel or 10Ω copper RTD sensors
- Ni120 RTDs: -112 to 500°F (-80 to 260°C)
- Cu10 RTDs: -143 to 500°F (-97 to 260°C)
Downloads & References
Back to Top
RTD Sensors
Mini Probe 100 Ohm RTD Sensor, -67°F to 240°F
ENVIROMUX-RTDS-MP240
- 0.19" (4.8 mm) round x 0.50" (13 mm) long stainless steel housing.
- Applications from -67 to 240°F (-55 to 115°C).
- Accurate to within ±0.27°F (±0.15°C).
- 100 Ohm Pt 385 curve.
- 18" (457 mm) 2-wire lead.
- Regulatory approvals: CE
- Requires the ENVIROMUX-RTDT-140/240 and ENVIROMUX-S420MA-24V to operate with the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
Duct 100 Ohm RTD Sensor, -67°F to 240°F
ENVIROMUX-RTDS-D240
- Rugged, waterproof sensor with 9" (229 mm) 304 stainless steel probe with 4" (102 mm) electrical strap and a nylon fitting.
- Nylon fitting with 1/2" NPT female thread.
- Applications from -67 to 240°F (-55 to 115°C).
- Accurate to within ±0.27°F (±0.15°C).
- 100 Ohm Pt 385 curve.
- 18" (457 mm) 2-wire lead.
- Designed for direct mounting on sheet metal duct systems.
- Regulatory approvals: CE
- Requires the ENVIROMUX-RTDT-140/240 and ENVIROMUX-S420MA-24V to operate with the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
Encapsulated 100 Ohm RTD Sensor, 35°F to 140°F
ENVIROMUX-RTDS-E140
- 0.17" round, 0.50" long housing.
- Applications from 35°F to 140°F (2°C to 60°C).
- Accurate to within ±0.6°F (±0.33°C).
- 100 Ohm Pt 385 curve.
- 8 feet, 24 AWG 2-wire leads
- Intended for indoor use only, in areas not subject to moisture or condensation.
- Suitable for remote temperature sensing for building automation systems and mechanical equipment room instrumentation
- Small enough to be installed in most HVAC thermostat enclosures.
- Regulatory approvals: CE
- Requires the ENVIROMUX-RTDT-140/240 and ENVIROMUX-S420MA-24V to operate with the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
Rugged Encapsulated 100 Ohm RTD Sensor, -30°F to 230°F
ENVIROMUX-RTDS-ER230
- 0.18" round, 0.50" long housing.
- Applications from -30°F to 230°F (-34°C to 110°C).
- Accurate to within ±0.6°F (±0.33°C).
- 100 Ohm Pt 385 curve.
- 8 feet, 24 AWG 2-wire leads
- Immune to the effects of moisture and condensation.
- Suitable for remote temperature sensing for building automation systems and mechanical equipment room instrumentation
- Small enough to be installed in most HVAC thermostat enclosures.
- Regulatory approvals: CE
- Requires the ENVIROMUX-RTDT-140/240 and ENVIROMUX-S420MA-24V to operate with the ENVIROMUX-2D/5D/16D or ENVIROMUX-SEMS-16U.
Back to Top
Sensor Accessories
4-20mA Sensor Converter
ENVIROMUX-S420MA-24V
- External RJ45 device monitors up to two 4-20 mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
- Provides 24VDC, 25 mA for each sensor
- Connector: Screw Terminal, 8-position.
- Supports CAT5/5e/6 cable up to 500 ft. (152 m)
- Includes Mounting Hardware.
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: RoHS.
Downloads & References
Sensor Cables
ENVIROMUX-2W-xx
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-2D/5D/16D.
- Available lengths (ft): 3/6/10/25/50/100/300/500
- Regulatory approvals: RoHS, UL